What Are The Main Installations Of Adhesive Tape Manufacturing Machine?

Herpu is one of the leader adhesive tape manufacturing machine exporter in China. The installation of the tape machine mainly has the following work:

1. The site where the tape conveyor is installed must be on a relatively flat hardened floor. Because the tape machine needs a good environment when working, it cannot be said that the ground is pitted, and the various parts of the operation are not coordinated, so that the products produced are not Qualified! This is all that needs to be considered.

2. Adhesive tape manufacturing machine assembly, the belt machine is generally separated from each other. Before the installation is completed, the front and rear intermediate frames are placed on the level ground to maintain a uniform horizontal line to maintain stable operation.

3. After the installation is completed, pre-work processing is carried out on all parts of the machine, including chains, sprockets, bearings, reducers, and adding lubricating oil or grease.

4. After the lubrication treatment, the main components are debugged, keeping them rotating smoothly, and there is no obstruction.

5. After the installation of each part is completed, turn on the power to test the adhesive tape manufacturing machine! No need to install materials during the test, perform naked test to observe the operation of each component! Found abnormality and perform power-off treatment.

6. When the belt conveyor is not in operation, it is necessary to disconnect the power supply for safety. Clearly understand the operation process and have certain awareness of safety.